[readme] Fix uninstall instructions

`nvm unload` will unset NVM_DIR. So gotta save NVM_DIR first.

.github/THREAT_MODEL.md

@@ -11,7 +11,7 @@ The aim of this section is to facilitate the identification of potential securit
 
 The following assets are considered important for the `nvm` project:
   - `nvm` source code and project documentation
-  - Underlying `nvm`` dependencies
+  - Underlying `nvm` dependencies
   - `nvm` development infrastructure
   - `nvm` installed devices including servers
 

.github/workflows/latest-npm.yml

@@ -9,11 +9,12 @@ jobs:
       latest: ${{ steps.set-matrix.outputs.requireds }}
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@v1
+        uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             iojs.org:443
             nodejs.org:443
+            raw.githubusercontent.com:443
       - uses: ljharb/actions/node/matrix@main
         id: set-matrix
         with:
@@ -46,7 +47,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@v1
+        uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             github.com:443
@@ -54,7 +55,7 @@ jobs:
             iojs.org:443
             nodejs.org:443
             registry.npmjs.org:443
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: ljharb/actions/node/install@main
         name: 'install node'
         with:
@@ -75,7 +76,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@v1
+        uses: step-security/harden-runner@v2
         with:
           egress-policy: block
       - run: 'echo tests completed'

.github/workflows/lint.yml

@@ -8,14 +8,14 @@ jobs:
       contents: read
     runs-on: ubuntu-latest
     steps:
-      - uses: step-security/harden-runner@v1
+      - uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             github.com:443
             raw.githubusercontent.com:443
             nodejs.org:443
             registry.npmjs.org:443
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: ljharb/actions/node/install@main
         name: 'nvm install ${{ matrix.node-version }} && npm install'
         with:
@@ -27,7 +27,7 @@ jobs:
       contents: read
     runs-on: ubuntu-latest
     steps:
-      - uses: step-security/harden-runner@v1
+      - uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             ghcr.io:443
@@ -36,7 +36,7 @@ jobs:
             pkg-containers.githubusercontent.com:443
             nodejs.org:443
             registry.npmjs.org:443
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: ljharb/actions/node/install@main
         name: 'nvm install ${{ matrix.node-version }} && npm install'
         with:
@@ -48,14 +48,14 @@ jobs:
       contents: read
     runs-on: ubuntu-latest
     steps:
-      - uses: step-security/harden-runner@v1
+      - uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             github.com:443
             raw.githubusercontent.com:443
             nodejs.org:443
             registry.npmjs.org:443
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: ljharb/actions/node/install@main
         name: 'nvm install ${{ matrix.node-version }} && npm install'
         with:
@@ -67,11 +67,11 @@ jobs:
       contents: read
     runs-on: ubuntu-latest
     steps:
-      - uses: step-security/harden-runner@v1
+      - uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             github.com:443
             raw.githubusercontent.com:443
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: check tests filenames
         run: ./rename_test.sh --check

.github/workflows/rebase.yml

@@ -12,12 +12,12 @@ jobs:
 
     steps:
     - name: Harden Runner
-      uses: step-security/harden-runner@v1
+      uses: step-security/harden-runner@v2
       with:
         allowed-endpoints:
           api.github.com:443
           github.com:443
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v4
     - uses: ljharb/rebase@master
       env:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -9,13 +9,16 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@v1
+        uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             github.com:443
+            api.github.com:443
+            objects.githubusercontent.com:443
+            raw.githubusercontent.com:443
             registry.npmjs.org:443
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
-      - uses: actions/setup-node@v3
+      - uses: actions/setup-node@v4
         with:
           node-version: "14"
       - run: npm install

.github/workflows/require-allow-edits.yml

@@ -12,7 +12,7 @@ jobs:
 
     steps:
     - name: Harden Runner
-      uses: step-security/harden-runner@v1
+      uses: step-security/harden-runner@v2
       with:
         allowed-endpoints:
           api.github.com:443

.github/workflows/shellcheck.yml

@@ -27,13 +27,14 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@v1
+        uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             ghcr.io:443
             github.com:443
             pkg-containers.githubusercontent.com:443
-      - uses: actions/checkout@v3
+            formulae.brew.sh:443
+      - uses: actions/checkout@v4
       - name: Set up Homebrew
         uses: Homebrew/actions/setup-homebrew@master
       - name: Install latest shellcheck
@@ -52,7 +53,7 @@ jobs:
       runs-on: ubuntu-latest
       steps:
         - name: Harden Runner
-          uses: step-security/harden-runner@v1
+          uses: step-security/harden-runner@v2
           with:
             egress-policy: block
         - run: 'echo tests completed'

.github/workflows/tests.yml

@@ -26,7 +26,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@v1
+        uses: step-security/harden-runner@v2
         with:
           allowed-endpoints:
             github.com:443
@@ -34,7 +34,7 @@ jobs:
             raw.githubusercontent.com:443
             nodejs.org:443
             iojs.org:443
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - run: sudo ${{ matrix.shell }} --version 2> /dev/null || dpkg -s ${{ matrix.shell }} 2> /dev/null || which ${{ matrix.shell }}
       - run: curl --version
       - run: wget --version

.github/workflows/toc.yml

@@ -12,12 +12,12 @@ jobs:
 
     steps:
     - name: Harden Runner
-      uses: step-security/harden-runner@v1
+      uses: step-security/harden-runner@v2
       with:
         allowed-endpoints:
           github.com:443
           registry.npmjs.org:443
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v4
       with:
         # https://github.com/actions/checkout/issues/217#issue-599945005
         # pulls all commits (needed for lerna / semantic release to correctly version)
@@ -25,7 +25,7 @@ jobs:
 
     # pulls all tags (needed for lerna / semantic release to correctly version)
     - run: git fetch --depth=1 origin +refs/tags/*:refs/tags/*
-    - uses: actions/setup-node@v3
+    - uses: actions/setup-node@v4
       with:
         node-version: '16'
     - run: npm install

README.md

@@ -6,7 +6,7 @@
 </a>
 
 
-# Node Version Manager [![Build Status](https://app.travis-ci.com/nvm-sh/nvm.svg?branch=master)][3] [![nvm version](https://img.shields.io/badge/version-v0.39.5-yellow.svg)][4] [![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/684/badge)](https://bestpractices.coreinfrastructure.org/projects/684)
+# Node Version Manager [![Build Status](https://app.travis-ci.com/nvm-sh/nvm.svg?branch=master)][3] [![nvm version](https://img.shields.io/badge/version-v0.39.7-yellow.svg)][4] [![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/684/badge)](https://bestpractices.coreinfrastructure.org/projects/684)
 
 <!-- To update this table of contents, ensure you have run `npm install` then `npm run doctoc` -->
 <!-- START doctoc generated TOC please keep comment here to allow auto update -->
@@ -41,12 +41,10 @@
   - [Use a mirror of node binaries](#use-a-mirror-of-node-binaries)
   - [.nvmrc](#nvmrc)
   - [Deeper Shell Integration](#deeper-shell-integration)
-    - [bash](#bash)
-      - [Automatically call `nvm use`](#automatically-call-nvm-use)
-    - [zsh](#zsh)
     - [Calling `nvm use` automatically in a directory with a `.nvmrc` file](#calling-nvm-use-automatically-in-a-directory-with-a-nvmrc-file)
+      - [bash](#bash)
+      - [zsh](#zsh)
       - [fish](#fish)
-      - [Calling `nvm use` automatically in a directory with a `.nvmrc` file](#calling-nvm-use-automatically-in-a-directory-with-a-nvmrc-file-1)
 - [Running Tests](#running-tests)
 - [Environment variables](#environment-variables)
 - [Bash Completion](#bash-completion)
@@ -101,10 +99,10 @@ nvm is a version manager for [node.js](https://nodejs.org/en/), designed to be i
 
 To **install** or **update** nvm, you should run the [install script][2]. To do that, you may either download and run the script manually, or use the following cURL or Wget command:
 ```sh
-curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
+curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash
 ```
 ```sh
-wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
+wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash
 ```
 
 Running either of the above commands downloads a script and runs it. The script clones the nvm repository to `~/.nvm`, and attempts to add the source lines from the snippet below to the correct profile file (`~/.bash_profile`, `~/.zshrc`, `~/.profile`, or `~/.bashrc`).
@@ -126,7 +124,7 @@ Eg: `curl ... | NVM_DIR="path/to/nvm"`. Ensure that the `NVM_DIR` does not conta
 
 - The installer can use `git`, `curl`, or `wget` to download `nvm`, whichever is available.
 
-- You can instruct the installer to not edit your shell config (for example if you already get completions via a [zsh nvm plugin](https://github.com/ohmyzsh/ohmyzsh/tree/master/plugins/nvm)) by setting `PROFILE=/dev/null` before running the `install.sh` script. Here's an example one-line command to do that: `PROFILE=/dev/null bash -c 'curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash'`
+- You can instruct the installer to not edit your shell config (for example if you already get completions via a [zsh nvm plugin](https://github.com/ohmyzsh/ohmyzsh/tree/master/plugins/nvm)) by setting `PROFILE=/dev/null` before running the `install.sh` script. Here's an example one-line command to do that: `PROFILE=/dev/null bash -c 'curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash'`
 
 #### Troubleshooting on Linux
 
@@ -174,7 +172,7 @@ You can use a task:
 ```yaml
 - name: Install nvm
   ansible.builtin.shell: >
-    curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
+    curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash
   args:
     creates: "{{ ansible_env.HOME }}/.nvm/nvm.sh"
 ```
@@ -236,7 +234,7 @@ If you have `git` installed (requires git v1.7.10+):
 
 1. clone this repo in the root of your user profile
     - `cd ~/` from anywhere then `git clone https://github.com/nvm-sh/nvm.git .nvm`
-1. `cd ~/.nvm` and check out the latest version with `git checkout v0.39.5`
+1. `cd ~/.nvm` and check out the latest version with `git checkout v0.39.7`
 1. activate `nvm` by sourcing it from your shell: `. ./nvm.sh`
 
 Now add these lines to your `~/.bashrc`, `~/.profile`, or `~/.zshrc` file to have it automatically sourced upon login:
@@ -356,7 +354,7 @@ Any time your local copy of `nvm` connects to https://nodejs.org, it will re-cre
 To get the latest LTS version of node and migrate your existing installed packages, use
 
 ```sh
-nvm install 'lts/*' --reinstall-packages-from=current
+nvm install --reinstall-packages-from=current 'lts/*'
 ```
 
 ### Migrating Global Packages While Installing
@@ -364,7 +362,7 @@ nvm install 'lts/*' --reinstall-packages-from=current
 If you want to install a new version of Node.js and migrate npm packages from a previous version:
 
 ```sh
-nvm install node --reinstall-packages-from=node
+nvm install --reinstall-packages-from=node node
 ```
 
 This will first use "nvm version node" to identify the current version you're migrating packages from. Then it resolves the new version to install from the remote server and installs it. Lastly, it runs "nvm reinstall-packages" to reinstall the npm packages from your prior version of Node to the new one.
@@ -372,8 +370,8 @@ This will first use "nvm version node" to identify the current version you're mi
 You can also install and migrate npm packages from specific versions of Node like this:
 
 ```sh
-nvm install 6 --reinstall-packages-from=5
+nvm install --reinstall-packages-from=5 6
-nvm install v4.2 --reinstall-packages-from=iojs
+nvm install --reinstall-packages-from=iojs v4.2
 ```
 
 Note that reinstalling packages _explicitly does not update the npm version_ — this is to ensure that npm isn't accidentally upgraded to a broken version for the new node version.
@@ -381,7 +379,7 @@ Note that reinstalling packages _explicitly does not update the npm version_ —
 To update npm at the same time add the `--latest-npm` flag, like this:
 
 ```sh
-nvm install 'lts/*' --reinstall-packages-from=default --latest-npm
+nvm install --reinstall-packages-from=default --latest-npm 'lts/*'
 ```
 
 or, you can at any time run the following command to get the latest supported npm version on the current node version:
@@ -415,7 +413,7 @@ nvm install iojs
 If you want to install a new version of io.js and migrate npm packages from a previous version:
 
 ```sh
-nvm install iojs --reinstall-packages-from=iojs
+nvm install --reinstall-packages-from=iojs iojs
 ```
 
 The same guidelines mentioned for migrating npm packages in node are applicable to io.js.
@@ -575,52 +573,53 @@ You can also use [`nvshim`](https://github.com/iamogbz/nvshim) to shim the `node
 
 If you prefer a lighter-weight solution, the recipes below have been contributed by `nvm` users. They are **not** supported by the `nvm` maintainers. We are, however, accepting pull requests for more examples.
 
-#### bash
+#### Calling `nvm use` automatically in a directory with a `.nvmrc` file
 
-##### Automatically call `nvm use`
+In your profile (`~/.bash_profile`, `~/.zshrc`, `~/.profile`, or `~/.bashrc`), add the following to `nvm use` whenever you enter a new directory:
+
+##### bash
 
 Put the following at the end of your `$HOME/.bashrc`:
 
 ```bash
 cdnvm() {
     command cd "$@" || return $?
-    nvm_path=$(nvm_find_up .nvmrc | tr -d '\n')
+    nvm_path="$(nvm_find_up .nvmrc | command tr -d '\n')"
 
     # If there are no .nvmrc file, use the default nvm version
     if [[ ! $nvm_path = *[^[:space:]]* ]]; then
 
-        declare default_version;
+        declare default_version
-        default_version=$(nvm version default);
+        default_version="$(nvm version default)"
 
         # If there is no default version, set it to `node`
         # This will use the latest version on your machine
-        if [[ $default_version == "N/A" ]]; then
+        if [ $default_version = 'N/A' ]; then
-            nvm alias default node;
+            nvm alias default node
-            default_version=$(nvm version default);
+            default_version=$(nvm version default)
         fi
 
         # If the current version is not the default version, set it to use the default version
-        if [[ $(nvm current) != "$default_version" ]]; then
+        if [ "$(nvm current)" != "${default_version}" ]; then
-            nvm use default;
+            nvm use default
         fi
-
+    elif [[ -s "${nvm_path}/.nvmrc" && -r "${nvm_path}/.nvmrc" ]]; then
-    elif [[ -s $nvm_path/.nvmrc && -r $nvm_path/.nvmrc ]]; then
         declare nvm_version
-        nvm_version=$(<"$nvm_path"/.nvmrc)
+        nvm_version=$(<"${nvm_path}"/.nvmrc)
 
         declare locally_resolved_nvm_version
         # `nvm ls` will check all locally-available versions
         # If there are multiple matching versions, take the latest one
         # Remove the `->` and `*` characters and spaces
         # `locally_resolved_nvm_version` will be `N/A` if no local versions are found
-        locally_resolved_nvm_version=$(nvm ls --no-colors "$nvm_version" | tail -1 | tr -d '\->*' | tr -d '[:space:]')
+        locally_resolved_nvm_version=$(nvm ls --no-colors "${nvm_version}" | command tail -1 | command tr -d '\->*' | command tr -d '[:space:]')
 
         # If it is not already installed, install it
         # `nvm install` will implicitly use the newly-installed version
-        if [[ "$locally_resolved_nvm_version" == "N/A" ]]; then
+        if [ "${locally_resolved_nvm_version}" = 'N/A' ]; then
-            nvm install "$nvm_version";
+            nvm install "${nvm_version}";
-        elif [[ $(nvm current) != "$locally_resolved_nvm_version" ]]; then
+        elif [ "$(nvm current)" != "${locally_resolved_nvm_version}" ]; then
-            nvm use "$nvm_version";
+            nvm use "${nvm_version}";
         fi
     fi
 }
@@ -631,9 +630,9 @@ cdnvm "$PWD" || exit
 
 This alias would search 'up' from your current directory in order to detect a `.nvmrc` file. If it finds it, it will switch to that version; if not, it will use the default version.
 
-#### zsh
+##### zsh
 
-##### Calling `nvm use` automatically in a directory with a `.nvmrc` file
+This shell function will install (if needed) and `nvm use` the specified Node version when an `.nvmrc` is found, and `nvm use default` otherwise.
 
 Put this into your `$HOME/.zshrc` to call `nvm use` automatically whenever you enter a directory that contains an
 `.nvmrc` file with a string telling nvm which node to `use`:
@@ -665,9 +664,8 @@ add-zsh-hook chpwd load-nvmrc
 load-nvmrc
 ```
 
-#### fish
+##### fish
 
-##### Calling `nvm use` automatically in a directory with a `.nvmrc` file
 This requires that you have [bass](https://github.com/edc/bass) installed.
 ```fish
 # ~/.config/fish/functions/nvm.fish
@@ -824,13 +822,13 @@ If installing nvm on Alpine Linux *is* still what you want or need to do, you sh
 ### Alpine Linux 3.13+
 ```sh
 apk add -U curl bash ca-certificates openssl ncurses coreutils python3 make gcc g++ libgcc linux-headers grep util-linux binutils findutils
-curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
+curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash
 ```
 
 ### Alpine Linux 3.5 - 3.12
 ```sh
 apk add -U curl bash ca-certificates openssl ncurses coreutils python2 make gcc g++ libgcc linux-headers grep util-linux binutils findutils
-curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
+curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash
 ```
 
 _Note: Alpine 3.5 can only install NodeJS versions up to v6.9.5, Alpine 3.6 can only install versions up to v6.10.3, Alpine 3.7 installs versions up to v8.9.3, Alpine 3.8 installs versions up to v8.14.0, Alpine 3.9 installs versions up to v10.19.0, Alpine 3.10 installs versions up to v10.24.1, Alpine 3.11 installs versions up to v12.22.6, Alpine 3.12 installs versions up to v12.22.12, Alpine 3.13 & 3.14 install versions up to v14.20.0, Alpine 3.15 & 3.16 install versions up to v16.16.0 (**These are all versions on the main branch**). Alpine 3.5 - 3.12 required the package `python2` to build NodeJS, as they are older versions to build. Alpine 3.13+ requires `python3` to successfully build newer NodeJS versions, but you can use `python2` with Alpine 3.13+ if you need to build versions of node supported in Alpine 3.5 - 3.15, you just need to specify what version of NodeJS you need to install in the package install script._
@@ -846,8 +844,12 @@ As a potential alternative, @mhart (a Node contributor) has some [Docker images
 
 To remove `nvm` manually, execute the following:
 
+First, use `nvm unload` to remove the nvm command from your terminal session and delete the installation directory:
+
 ```sh
-$ rm -rf "$NVM_DIR"
+$ nvm_dir="${NVM_DIR:-~/.nvm}"
+$ nvm unload
+$ rm -rf "$nvm_dir"
 ```
 
 Edit `~/.bashrc` (or other shell resource config) and remove the lines below:
@@ -929,9 +931,9 @@ You have to make sure that the user directory name in `$HOME` and the user direc
 To change the user directory and/or account name follow the instructions [here](https://support.apple.com/en-us/HT201548)
 
 [1]: https://github.com/nvm-sh/nvm.git
-[2]: https://github.com/nvm-sh/nvm/blob/v0.39.5/install.sh
+[2]: https://github.com/nvm-sh/nvm/blob/v0.39.7/install.sh
 [3]: https://app.travis-ci.com/nvm-sh/nvm
-[4]: https://github.com/nvm-sh/nvm/releases/tag/v0.39.5
+[4]: https://github.com/nvm-sh/nvm/releases/tag/v0.39.7
 [Urchin]: https://git.sdf.org/tlevine/urchin
 [Fish]: https://fishshell.com
 
@@ -989,7 +991,7 @@ Here's what you will need to do:
   If one of these broken versions is installed on your system, the above step will likely still succeed even if you didn't include the `--shared-zlib` flag.
   However, later, when you attempt to `npm install` something using your old version of node.js, you will see `incorrect data check` errors.
   If you want to avoid the possible hassle of dealing with this, include that flag.
-  For more details, see [this issue](https://github.com/nodejs/node/issues/39313) and [this comment](https://github.com/nodejs/node/issues/39313#issuecomment-902395576)
+  For more details, see [this issue](https://github.com/nodejs/node/issues/39313) and [this comment](https://github.com/nodejs/node/issues/39313#issuecomment-90.39.776)
 
 - Exit back to your native shell.
 
@@ -1016,7 +1018,7 @@ Now you should be able to use node as usual.
 If you've encountered this error on WSL-2:
 
   ```sh
-  curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
+  curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash
   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                   Dload  Upload  Total   Spent    Left  Speed
   0     0    0     0    0     0      0      0 --:--:--  0:00:09 --:--:--     0curl: (6) Could not resolve host: raw.githubusercontent.com
@@ -1037,7 +1039,7 @@ This could simply be solved by running this in your root directory:
   sudo chattr +i /etc/resolv.conf
   ```
 
-This deletes your `resolv.conf` file that is automatically generated when u run WSL, creates a new file and puts `nameserver 8.8.8.8`, then creates a `wsl.conf` file and adds `[network]` and `generateResolveConf = false` to prevent auto-generation of that file.
+This deletes your `resolv.conf` file that is automatically generated when you run WSL, creates a new file and puts `nameserver 8.8.8.8`, then creates a `wsl.conf` file and adds `[network]` and `generateResolveConf = false` to prevent auto-generation of that file.
 
 You can check the contents of the file by running:
 

install.sh

@@ -33,7 +33,7 @@ nvm_install_dir() {
 }
 
 nvm_latest_version() {
-  nvm_echo "v0.39.5"
+  nvm_echo "v0.39.7"
 }
 
 nvm_profile_is_bash_or_zsh() {

nvm.sh

@@ -3565,7 +3565,7 @@ nvm() {
         fi
       else
         export PATH="${NEWPATH}"
-        command hash -r
+        \hash -r
         if [ "${NVM_SILENT:-0}" -ne 1 ]; then
           nvm_echo "${NVM_DIR}/*/bin removed from \${PATH}"
         fi
@@ -3697,7 +3697,7 @@ nvm() {
         export MANPATH
       fi
       export PATH
-      command hash -r
+      \hash -r
       export NVM_BIN="${NVM_VERSION_DIR}/bin"
       export NVM_INC="${NVM_VERSION_DIR}/include/node"
       if [ "${NVM_SYMLINK_CURRENT-}" = true ]; then
@@ -4226,7 +4226,7 @@ nvm() {
       NVM_VERSION_ONLY=true NVM_LTS="${NVM_LTS-}" nvm_remote_version "${PATTERN:-node}"
     ;;
     "--version" | "-v")
-      nvm_echo '0.39.5'
+      nvm_echo '0.39.7'
     ;;
     "unload")
       nvm deactivate >/dev/null 2>&1

package.json

@@ -1,6 +1,6 @@
 {
   "name": "nvm",
-  "version": "0.39.5",
+  "version": "0.39.7",
   "description": "Node Version Manager - Simple bash script to manage multiple active node.js versions",
   "directories": {
     "test": "test"